Plastic T-shirt bag making machine
1.Plastic bag making machine is suitable for high density polyethylene (HDPE), the low density gathers alkene (LDPE) plastic film material.which is produces the plastic film to flat bag,
2. the performance of Plastic bag making machine is stable, the back cover is reliable, is the large, medium and small processed foods enterprise is most economical appropriately, bag sealing&cutting system equipment.
Plastic bag machine with below parts and information:
1.step motor or Japan servo motor ;
2.machine with photo cell;
3.produce flat open bag,patch bag and T-shirt bag;
4.suit to use LDPE and HDPE film to produce plastic bag.


Plastic bag making machine technical Parameter :
Model: SHXJ-A600 SHXJ-A700 SHXJ-A800 SHXJ-A900 SHXJ-A1000
width of sealing &cutting: 580 mm 680 mm 780 mm 880 mm 980 mm
length of sealing & cutting: 700 mm 1200 mm 1200 mm 1400 mm 1600 mm
speed of bag-making (pc/min): 240-400 240-400 60-100 50-100 40-100
Kingdom Machine Factory manufacture and supply automatic T-shirt bag making machine,Plastic trash bag machine,blown film extrusion,film blowing machine,flexographic printing machine,rotogravure printing machine,PP drinking straw machine,stretch film machine in Dubai,Ajman,Umm al-Quwain,Abu Dhabi,Sharjah,Fujairah,United Arab Emirates.
Kingdom Machine co,ltd Mobile:0086-1358812663; 0086-13088651008;
Whatsapp/Viber/tango:+86-13958812663;
Tel.:0086-577-66881211; Fax:0086-577-66881311;
sale@kingdommachine.com; Kingdombillwang@hotmail.com;
Skype:kingdombillwang www.kingdommachine.com;
Address:Ruian Economic Zone,Wenzhou,China
How to safely install LED strip lights
LED light strip installation process
1. Check the light strip: First, determine the length to be installed, and then take an integer and intercept it. This kind of light strip has a unit of 1 meter. It will not affect the circuit until it is cut off at the notch. If it is cut at will, one unit will not light up.
Example: If a length of 7.5 meters is required, the light strip needs to be cut to 8 meters.
2. Link plug: The LED itself is a diode, driven by DC, so it has positive and negative poles. If the positive and negative poles are connected reversely, it will be in an insulated state and the light strip will not light up. If the connecting plug does not light up when it is powered on, you only need to disassemble the other end of the light strip.
3. Placement of light strips: The light strips are packaged in trays. The newly disassembled light strips will be twisted and difficult to install. You can straighten them first and then put them into the light trough. Since the light strip emits light from one side, uneven light and dark will appear if it is placed unevenly. Be careful especially around corners.
How to install LED light strips
1. Indoor installation: When LED light strips are used for indoor decoration, installation is very simple because they do not have to withstand wind and rain. Take the LED light strips produced by Guanghong Electronics as an example. Each LED light strip has self-adhesive 3m double-sided tape on the back. During installation, you can directly peel off the sticker on the surface of the 3m double-sided tape, and then fix the light strip where needed. Where to install, just press it flat with your hands.
2. Outdoor installation: Outdoor installation will be exposed to wind and rain. If 3m glue is used to fix it, the 3m glue will decrease over time and cause the LED light strip to fall off. Therefore, outdoor installation often uses card slots to fix it. Where cutting and connection are required, the method is the same as for indoor installation, except that additional waterproof glue is required to consolidate the waterproof effect of the connection points.
3. Power connection method: The general voltage of LED light strips is DC 12v, so a switching power supply is required. The size of the power supply is determined according to the power and connection length of the LED light strips. If you do not want each LED light strip to be controlled by a power supply, you can purchase a relatively high-power switching power supply as the main power supply, and then connect all the input power supplies of all LED light strips in parallel (if the wire size is not enough, you can extend it separately). All are powered by the main switching power supply. The advantage of this is that it can be controlled centrally. The inconvenience is that it cannot achieve the lighting effect and switch control of a single LED light strip. The specific method can be measured by yourself.
4. Controller connection method: LED marquee strips and RGB full-color strips require a controller to achieve changing effects, and the control distance of each controller is different. Generally speaking, the control distance of a simple controller is 10 to 15 meters, the control distance of the remote controller is 15 to 20 meters, and the longest distance can be controlled to 30 meters. If the connection distance of the LED light strip is long and the controller cannot control such a long light strip, then a power amplifier is needed for tapping.
Things to note when installing LED light strips:
1) Do not turn on the power to light up the LED light strips before the entire roll of LED light strips is removed from the packaging or piled up;
2) When the LED light strip needs to be cut according to the length of the on-site installation, the light strip can only be cut at the place marked with scissors, otherwise one of the units will not light up. Generally, the length of each unit is 1.5-2 meters;
3) When connecting to the power supply or connecting two light strips in series, first bend the head of the Licai lamp to the left and right to expose about 2-3mm of the wires in the light strip. Use scissors to cut it clean without leaving burrs, and then use a male needle to connection to avoid short circuit;
4) Only LED colorful light strips with the same specifications and the same voltage can be connected in series, and the total length of the series connection cannot exceed the maximum allowable length;
5) When LED light strips are connected in series, try to light one section after each connection, so as to promptly find out whether the positive and negative poles are connected incorrectly and whether the light emission direction of each section of light strips is consistent;
6) The end of the light strip must be put on a PVC tail plug, and then tied tightly with a clamp tape, and then sealed around the interface with neutral glass glue to ensure safety.
7) Because LED has unidirectional conductivity, if you use a power cord with an AC-DC converter, you should first conduct a power-on test after completing the power connection to confirm that the positive and negative poles are connected correctly before putting it into use.
Dekingled.com is a professional LED strip light manufacturer that provides LED strip light wholesale, providing high-quality, cost-effective LED light strips, LED power supplies and LED modules.
1. Check the light strip: First, determine the length to be installed, and then take an integer and intercept it. This kind of light strip has a unit of 1 meter. It will not affect the circuit until it is cut off at the notch. If it is cut at will, one unit will not light up.
Example: If a length of 7.5 meters is required, the light strip needs to be cut to 8 meters.
2. Link plug: The LED itself is a diode, driven by DC, so it has positive and negative poles. If the positive and negative poles are connected reversely, it will be in an insulated state and the light strip will not light up. If the connecting plug does not light up when it is powered on, you only need to disassemble the other end of the light strip.
3. Placement of light strips: The light strips are packaged in trays. The newly disassembled light strips will be twisted and difficult to install. You can straighten them first and then put them into the light trough. Since the light strip emits light from one side, uneven light and dark will appear if it is placed unevenly. Be careful especially around corners.
How to install LED light strips
1. Indoor installation: When LED light strips are used for indoor decoration, installation is very simple because they do not have to withstand wind and rain. Take the LED light strips produced by Guanghong Electronics as an example. Each LED light strip has self-adhesive 3m double-sided tape on the back. During installation, you can directly peel off the sticker on the surface of the 3m double-sided tape, and then fix the light strip where needed. Where to install, just press it flat with your hands.
2. Outdoor installation: Outdoor installation will be exposed to wind and rain. If 3m glue is used to fix it, the 3m glue will decrease over time and cause the LED light strip to fall off. Therefore, outdoor installation often uses card slots to fix it. Where cutting and connection are required, the method is the same as for indoor installation, except that additional waterproof glue is required to consolidate the waterproof effect of the connection points.
3. Power connection method: The general voltage of LED light strips is DC 12v, so a switching power supply is required. The size of the power supply is determined according to the power and connection length of the LED light strips. If you do not want each LED light strip to be controlled by a power supply, you can purchase a relatively high-power switching power supply as the main power supply, and then connect all the input power supplies of all LED light strips in parallel (if the wire size is not enough, you can extend it separately). All are powered by the main switching power supply. The advantage of this is that it can be controlled centrally. The inconvenience is that it cannot achieve the lighting effect and switch control of a single LED light strip. The specific method can be measured by yourself.
4. Controller connection method: LED marquee strips and RGB full-color strips require a controller to achieve changing effects, and the control distance of each controller is different. Generally speaking, the control distance of a simple controller is 10 to 15 meters, the control distance of the remote controller is 15 to 20 meters, and the longest distance can be controlled to 30 meters. If the connection distance of the LED light strip is long and the controller cannot control such a long light strip, then a power amplifier is needed for tapping.
Things to note when installing LED light strips:
1) Do not turn on the power to light up the LED light strips before the entire roll of LED light strips is removed from the packaging or piled up;
2) When the LED light strip needs to be cut according to the length of the on-site installation, the light strip can only be cut at the place marked with scissors, otherwise one of the units will not light up. Generally, the length of each unit is 1.5-2 meters;
3) When connecting to the power supply or connecting two light strips in series, first bend the head of the Licai lamp to the left and right to expose about 2-3mm of the wires in the light strip. Use scissors to cut it clean without leaving burrs, and then use a male needle to connection to avoid short circuit;
4) Only LED colorful light strips with the same specifications and the same voltage can be connected in series, and the total length of the series connection cannot exceed the maximum allowable length;
5) When LED light strips are connected in series, try to light one section after each connection, so as to promptly find out whether the positive and negative poles are connected incorrectly and whether the light emission direction of each section of light strips is consistent;
6) The end of the light strip must be put on a PVC tail plug, and then tied tightly with a clamp tape, and then sealed around the interface with neutral glass glue to ensure safety.
7) Because LED has unidirectional conductivity, if you use a power cord with an AC-DC converter, you should first conduct a power-on test after completing the power connection to confirm that the positive and negative poles are connected correctly before putting it into use.
Dekingled.com is a professional LED strip light manufacturer that provides LED strip light wholesale, providing high-quality, cost-effective LED light strips, LED power supplies and LED modules.
What Do You Know About
As a business owner in Highlands, FL, you understand the importance of maintaining a clean and healthy workspace for your employees and customers. A clean and well-maintained office not only boosts morale and productivity but also reflects positively on your company's image. However, with the demands of running a business, it can be challenging to find the time and resources to keep your commercial space clean and tidy. This is where commercial cleaning services come in.
1. Benefits of Commercial Cleaning
Commercial cleaning services offer a range of benefits that can help you maintain a healthy and productive workspace. Some of the benefits include:
* Improved air quality: Regular cleaning helps to remove dust, dirt, and other pollutants from the air, improving the overall air quality and reducing the risk of respiratory problems.
* Reduced absenteeism: A clean and well-maintained workspace can help reduce absenteeism due to illness, as employees are less likely to fall ill in a clean environment.
* Increased productivity: A clean and organized workspace can help employees stay focused and productive, leading to increased efficiency and better results.
* Enhanced customer experience: A clean and well-maintained office can also improve the customer experience, as customers are more likely to perceive your business as professional and reputable.
2. Types of Commercial Cleaning Services
Commercial cleaning services can be customized to meet the specific needs of your business. Some common types of commercial cleaning services include:
* Daily cleaning: This type of service involves daily cleaning and maintenance of your office, including tasks such as trash removal, dusting, and vacuuming.
* Weekly cleaning: This type of service involves weekly cleaning and maintenance of your office, including tasks such as deep cleaning of high-traffic areas, restrooms, and kitchens.
* Special event cleaning: This type of service involves specialized cleaning and maintenance for special events, such as conferences, parties, and meetings.
* Construction cleaning: This type of service involves cleaning and maintenance of construction sites, including tasks such as removing debris, dust, and dirt.
3. How to Choose the Right Commercial Cleaning Service
Choosing the right commercial cleaning service can be a daunting task, especially with the many options available. Here are some tips to help you choose the right service for your business:
* Research and compare: Research different commercial cleaning services and compare their services, prices, and reviews.
* Check credentials: Check the credentials of the cleaning service, including their licenses, certifications, and insurance.
* Ask questions: Ask the cleaning service questions about their services, including what they will do, how they will do it, and what they will charge.
* Check references: Check references from previous clients to get an idea of the quality of service you can expect.
4. What to Expect from a Commercial Cleaning Service
When you hire a commercial cleaning service, you can expect a range of services, including:
* Cleaning of high-traffic areas, such as hallways, stairwells, and break rooms
* Cleaning of restrooms, including sinks, toilets, and mirrors
* Cleaning of kitchens, including appliances, counters, and floors
* Cleaning of offices, including desks, chairs, and windows
* Removal of trash and recyclables
* Disinfecting and sanitizing of surfaces
5. How to Maintain a Clean and Healthy Workspace
Maintaining a clean and healthy workspace is an ongoing process that requires regular cleaning and maintenance. Here are some tips to help you maintain a clean and healthy workspace:
* Create a cleaning schedule: Create a cleaning schedule that outlines the tasks that need to be completed and when they need to be completed.
* Assign cleaning tasks: Assign cleaning tasks to employees or cleaning staff to ensure that tasks are completed regularly.
* Provide cleaning supplies: Provide cleaning supplies, such as soap, paper towels, and trash bags, to ensure that employees have what they need to clean.
* Encourage employee participation: Encourage employee participation in cleaning and maintenance tasks to promote a sense of ownership and responsibility.
6. The Importance of Green Cleaning
Green cleaning is an important consideration for businesses, as it can help reduce the environmental impact of cleaning products and practices. Here are some benefits of green cleaning:
* Reduced environmental impact: Green cleaning products and practices can help reduce the environmental impact of cleaning, including reducing waste, conserving water, and reducing energy consumption.
* Improved indoor air quality: Green cleaning products and practices can help improve indoor air quality by reducing the use of harsh chemicals and toxins.
* Cost savings: Green cleaning products and practices can help reduce costs by reducing waste and conserving resources.
7. How to Implement Green Cleaning in Your Business
Implementing green cleaning in your business can be a simple and effective way to reduce your environmental impact and improve indoor air quality. Here are some tips to help you implement green cleaning in your business:
* Choose green cleaning products: Choose cleaning products that are certified as green or eco-friendly, such as those that are biodegradable, non-toxic, and free of harsh chemicals.
* Implement sustainable practices: Implement sustainable practices, such as reducing water consumption, conserving energy, and reducing waste.
* Train employees: Train employees on the importance of green cleaning and provide them with the necessary training and resources to implement green cleaning practices.
8. The Benefits of Regular Maintenance
Regular maintenance is an important part of commercial cleaning, as it can help prevent problems and reduce the need for costly repairs. Here are some benefits of regular maintenance:
* Prevents problems: Regular maintenance can help prevent problems, such as leaks, clogs, and equipment failures, by identifying and addressing issues before they become major problems.
* Reduces costs: Regular maintenance can help reduce costs by reducing the need for costly repairs and replacements.
* Improves efficiency: Regular maintenance can help improve efficiency by ensuring that equipment and systems are functioning properly and efficiently.
9. Conclusion
Commercial cleaning is an important part of maintaining a healthy and productive workspace. By choosing the right commercial cleaning service, implementing green cleaning practices, and maintaining a clean and healthy workspace, you can improve the overall health and well-being of your employees and customers. Remember to research and compare different commercial cleaning services, check credentials, ask questions, and check references to ensure that you choose the right service for your business.
A Simple Plan:
How I Became An Expert on
News For This Month:
As the temperature rises throughout the summer months, having an operating cooling system ends up being essential. When your a/c system breaks down, it can transform your home into an uneasy atmosphere. Understanding the importance of prompt air conditioning repair work can assist guarantee your system runs effectively and efficiently, supplying you with the great relief you require.
Among the most usual indications that your a/c needs fixing is inconsistent air movement. If you discover that some spaces are cooler than others or if the air movement appears weak, it could show a problem with your device. Clogged up filters, blocked air ducts, or malfunctioning followers can all contribute to this issue. Attending to these problems rapidly will not just enhance comfort however also increase your system's longevity.
Another common signs and symptom that indicates a cooling unit in distress is unusual sounds or odors. If you hear grinding, banging, or hissing sounds originating from your system, it's important to get it inspected. These sounds may indicate loose parts, a stopping working compressor, or refrigerant leaks. Likewise, any strange smells, such as melting or musty smells, ought to be checked out immediately as they can indicate electrical concerns or mold growth in your ductwork.
Regular upkeep is vital for stopping unforeseen failures and expensive repairs. Arranging routine exams with a qualified professional can aid determine potential problems prior to they intensify. During these evaluations, professionals can clean elements, change filters, and guarantee that your cooling system is running at peak effectiveness. Investing in normal maintenance can inevitably conserve you cash by expanding the life of your system and reducing power prices.
To conclude, comprehending the signs that indicate your a/c system needs fixing is the initial step towards maintaining your home comfy during heat. From dealing with air movement problems and attending to unexpected noises to committing to normal upkeep, positive treatment will assist guarantee your system runs smoothly. Don't wait for a breakdown-- organize your a/c system today to enjoy a cool, comfy home all summertime long.
A 10-Point Plan for (Without Being Overwhelmed)
A Brief History of